Application of light duty storage racking in warehouse

With the development of many economy, now in the warehouse, many warehouses need to use a variety of shelves to store goods. Light duty steel racks for steel is one of the most common shelves in warehouse. So what is light shelf? Light shelf refers to the shelf with light bearing capacity. Generally, the bearing capacity of light shelf is between 80-150 kg per floor. In the traditional division of storage shelf, the load of light shelf is between angle steel shelf and medium shelf. However, due to the improvement of processing technology and technology. It can use lighter steel plate for shelf production, so it can use lower cost materials to produce light shelves under the lower load-bearing requirements, so compared with its convenient installation advantages, light shelves more and more replace the angle steel shelves.
In the electronic product warehouse, most of the electronic products are relatively small, so the light shelf is widely used in the electronic mine. Many electronic factory components, turnover and finished product warehouse use a large number of light shelves. Of course, in many cases, especially when storing electronic components, in order to achieve the anti-static effect, the shelf needs to be designed as an anti-static shelf. Generally, there are two ways, one is to install anti-static skin on the general shelf level, the other is to use anti-static powder foam, but the cost of the rear side is relatively high, and it is rarely used.
Most of the light shelves are manual operation, and the height of the shelves is usually less than 2.2 meters, so as to adapt to the manual access. If the height is too high, it is necessary to cooperate with the climbing equipment to carry out the operation. Light shelves are generally placed on the ground without expansion bolt connection, so for light shelves, we are forbidden to climb to avoid safety accidents.