• facebook linkedin youtube
  • Spieth, Space solutions
    More Than 18 Years Manufacturing & Exporting
Home/News/Product News/Five features of pallet racking
Product News

Five features of pallet racking

Time:12/2/202187
Share:
Pallet racking, also commonly referred to as beam racking, is usually heavy duty and is most common in domestic storage racking systems. It is not only suitable for multi-variety and small batch goods, but also for small variety and large batch goods. 

Pallet racking is mainly used with pallets and common forklifts. It is very safe and convenient, and can make full use of warehouse space. The goods are packed on the pallets, and then the pallets are easily and freely taken off from the racks by forklift. It is widely used in warehouses, supermarkets, distribution centers and other logistics places.

Now Spieth pallet racking factory will introduce you the main features of pallet racking.

beam-racking


Large span, high load capacity

The length (span) of pallet racking is mainly determined by the size of the pallets. Usually, two conventional pallets can be placed on a single rack. If the load capacity of a single pallet is particularly large (more than 3 tons), only one pallet can be placed on each level.

Structural stability

Due to the high load-bearing requirements of pallet racking, the stability of pallet racking is improved. There are also special requirements, such as the bottom of the pallet racking must be installed floor expansion screws to ensure the stability of the pallet racking.

No laminate required

Generally speaking, pallet racking does not need laminate, only one beam needs to be installed on the crossbeam, usually 2 beams per pallet position. This can save cost to the greatest extent.

The number of pallet racking layers can be determined by yourself.

The number of layers of pallet racking can be determined according to the room height of the warehouse, the height of each pallet space and other conditions. The bottom layer can be placed directly on the ground, without beams.

High utilization rate

High utilization rate of pallet racking, flexible and convenient access, supplemented by computer management or control, can basically meet the requirements of modern logistics system.


Further Reading:


Which features and applications are there in drive-in pallet racking ?

What I Wish I Knew a Year Ago About Wire Mesh Decking

The main causes of pallet damage and prevention methods

How should the shuttle shelf be used and what equipment is needed to go with it?

The perfect rack for tubes - cantilever racking





Send Message
if you have questions or suggestions,please leave us a message,we will reply you as soon as we can
ONLINE SERVICE
0
Browsing History