Spieth drive in pallet racks is a cost-effective solution to high-density storage. This static system has rails running the depth of the rack for pallet placement. The only limitation to the depth of pallet storage is the capability to drive deep into the system. The rack depth reduces the need for aisles and drastically increases cubed space utilization.
Spieth drive-in pallet racks offer a cost-effective solution for high-density storage. This static system incorporates rails running the depth of the rack to facilitate pallet placement. The depth of pallet storage is only limited by the ability to drive deep into the system. By eliminating the need for aisles, the rack depth significantly enhances space utilization.
This type of installation consists of a series of racking units forming inner loading aisles, supported by rails for pallets. Forklift trucks access these inner aisles with their load positioned higher than the target deposit level.
Support rails are present on both sides of each loading aisle, arranged at different levels, where pallets are stacked. Built with exceptionally robust materials, this racking system is perfect for storing fully-loaded pallets.
Each loading aisle has support rails on both sides. These are arranged on different levels and the pallets are placed on top. This racking system is made of an extremely robust material, thus making it suitable for storing fully-loaded pallets.
Drive Through Pallet Racking Features:
●Most cost-effective high-density storage rack
●Excellent solution for large volume storage of like product
●May be able to use existing forklift equipment
●Allows for use of either roll-formed or structural rack materials
●The forklift has straight access to product loads, allowing for deeper pallet storage
●Drive-In is a LIFO (last in, first out) storage system
Drive In Pallet Racking Main Structure:
1. Frame
2. Drive-in beam
3. Bracket
4. GP-7 rail
5. C-rail
6. Upright footplate
7. Levelling plates
8. Anchor Bolts
9. Bracing set (Construction system 1)
10. Upper cross bracing (Construction system 2)
11. Guide rail (optional)